153118 Burkert Burkert Solenoid Valve 153118, 3 port , 24 V dc
Description
Burkert Solenoid Valve 153118, 3 port , 24 V dc
The product with part number 153118 (Burkert Solenoid Valve 153118, 3 port , 24 V dc)
is from company Burkert and distributed with basic unit price 73,82 EUR. Minimal order quantity is 1 pc.
Body MaterialPPS Flow Factor Kv0.005m³/h Maximum Operating Temperature+55°C Maximum Working Pressure3bar Minimum Operating Temperature0°C Number of Ports3 Operating Temperature Range0 → +55 °C Orifice Diameter0.6mm Suitable ApplicationsAqueous Solution, Compressed Air, Water Supply Voltage24 V dc Type3/2 Product Details 2 / 2 or 3 / 2-way mini solenoid valve 2 / 2 or 3 / 2 way (any connection) modelWith separating membrane. Medium only comes into contact with housing and membraneWith manual actuationVery low clearance volume, easy to flush and emptyExtremely low power consumptionSuitable for material-compatible media such as water, compressed air, aqueous solutionsIdeal for use as a replenishment, metering, mixing and distribution valve for small quantities (very short switching times)For analysis, medical and laboratory equipmentSuitable for vacuum applications Pressure range: Vac - 3 bar Temperature of medium: 0 °C → +50 °C Amb. temperature: max. +55 °C Housing material: PPS Sealing material: FPM Voltage: 24 Vdc El. Capacity: 1.5 W El. Connection: 2 individual strands, 300 mm long Protection rating: IP65 Wire connection: Tube connector on side Nominal width: 0.6 mm KV value: 0.0046 m3/h Weight: 13 g Two Way Inert Gases and Fluid Valves Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.
Following Parts
Random Products
(keyword 153118 Burkert Burkert Solenoid Valve 153118, 3 port , 24 V dc)
